The joy of having a discreet camera cannot be under estimated when you want to shoot in an urban or city surrounding. I found that shooting with the Olympus PEN-F and it’s little pancake Zuiko 14-42mm/f3.5-5.6 EZ lens was just a joy.
Being able to control the output and filtration of the images whilst shooting is a bonus of the customisable options on the PEN-F which meant I was able to adjust each image at the time of shooting without it being a distraction from the image taking process.
I’m still convinced by the output of the in-camera jpegs in quite the same way as I was with the Fujifilm ACROS setting that I wrote about previously, but I think there is more scope of customisation with the Olympus system and so I just have to experiment.
The image quality from the smaller sensor, being micro 4/3rds rather than APS-C does not seem to make any significant difference to the images produced when viewed on my 5K monitor even at 100% and I do not anticipate any issues with printing the images to seriously large sizes. As I have said before, everything has its limitations and you just work around them. I’ve shot and printed from much smaller sensors and with many fewer megapixels in the past.
The PEN-F actively encourages you to go outside of your comfort zone and try new things, and that just has to be good for creativity.
For more images from this visit to Elgin, please visit my dedicated blog site
There is a lot of debate about RAW and JPEG, and also about excessive use of Photoshop at the moment. I have always believed in getting it right in-camera, but I also believe that Photoshop, or at least Lightroom, can be used in a way that is really no different from using a traditional darkroom (and we cheated in there too…)
I also believe that the biggest part of the decision on what is manipulation and what is simply development of the raw image lies more in the question of what the intended outcome is designed to achieve. If you are shooting news then in my opinion you should not be manipulating the image at all. You should process only to achieve the technical best in the image so that it is reproduced correctly during print or online production – compensate for limitation of the sensor in exposure etc., but do not add or remove artefacts, or anything else for that matter. Yes McCurry, I am looking at you…
This is a similar although not the same debate as that of staging photos. Let us be honest now and say that this is something that news photographers have been doing for many, many, years. Sometime you miss a shot and so you might be tempted to pop your hand in your pocket and get the protagonists to re-stage it. Trust my four years in the national news media to tell you that it happened a lot more often than people care to admit. It also has been happening since we had war artists, let alone war photographers!
Re-staging is not that different from selecting the viewpoint or lens to deliver the narrative required – look at the photos of Britain’s 2017 election involving Teresa May’s campaigning and you’ll soon get what I mean. Choosing the viewpoint, choosing the lens, and even choosing the film stock back in the days of film, all contributed to choosing the narrative or matching the image to the narrative. We were always selective, and we will always be. The direction of the editorial and the newspaper itself have always changed the focus and the narrative if the images. When we had proper employment and dedicated single paper photographers, they shot for their paper. They made decisions, even in their subconscious, about how best to capture the scene in a way that would fit with the text and context of their news team. Now, because nobody has a one paper job anymore, but is a freelance the changes are that shoots are done with a keen eye on what can be done post production as much to tailor the image to a narrative, as what used to be done to fit that narrative at the time of the shoot.
Because the viewer is getting bombarded with images via the online feeds and social media outlets, and because everyone takes photos with their phone, they are getting wiser to what can be done to images. The result of this is a growing interest in delivery of photos direct from camera, without any app or image manipulation software at all. We are going back to the time when image buyers want be more reliant on the skills of the photographer and not on the computer skills of the retoucher again.
I get this, it’s going back to the ethos of film in a way. Of course, there is then the whole argument of colour or black and white. If you are shooting in monochrome then you are already choosing to make a significant difference to the image from the reality. You can call this manipulation, processing, or just a choice in the narrative, it really doesn’t matter. All art is subjective, and everyone of us will view an image in a different way. We bring our social background, our perceptions, our interpretations, our experience, our moral and social values, and our politics to every image we see. Our brains make millions of decisions about an image in milliseconds, bringing all of our context to its content and its context.
Then there is the greater debate about inclusion, or not, at both shooting and processing stages. Is the way we crop something likely to alter its narrative? Of course it is! That is why we crop the darned thing in the first place! That or simply for aesthetics. But what about removing or adding artefacts in post production? That is another debate that will also rage on. At the end of the day, what do YOU want from your image? What is YOUR narrative? And, importantly, where are you going to use it, and how?
With all of this in mind, I have started to use the ACROS setting on my Fujifilm XT-2 quite a lot recently. To my mind it produces a very good rendition of film, although personally I preferred Ilfords’ emulsions. I’d love to see some of those resurrected as presets, but I digress.
Shooting in black and white using the ACROS setting means that the view you get from the electronic viewfinder and the screen show you what you will get as an ACROS in-camera JPEG which means you can see what you’re getting before you press the shutter button. This is a real advantage over the DSLR viewfinder and even over film cameras where you would wait until development. If you set the camera to shoot RAW and JPEG then you still have the raw images, which will be in sRGB or AdobeRGB, to do other things with it later.
Shooting in black and white, and seeing in black in white, make you consider shapes and forms, patterns and textures, contrasts, as well as composition in much more detail. In monochrome or even in a limited palate you cannot afford to have an image that is too busy: When shooting in colour then the colours will define and break up a busy image, in monochrome then as many colours are rendered very similarly, it become confusing to see the subject of the shot and the narrative can become lost in a hatch-potch of other distractions.
If you look at the image above which was shot in colour and then using layers changed into monochrome before being joined back together, the light green pencil and the orange pencil contrast beautifully, but when rendered in monochrome they are almost identical. Shooting in monochrome will force you to change the way you view the world, and that will also change the way you shoot.
Fujifilm has more than one monochrome setting so why ACROS? Well, that is actually a very personal choice and again subject to the narrative of the image you are trying to capture. There is absolutely nothing wrong with the other black and white settings, and if you shoot with the X-Pro1 or XT-1, as I did, then ACROS is not available to you anyway. Shooting Monochrome with a Yellow filter is just as good for experimenting with, and whilst I like the Monochrome with a Red filter setting, personally, many people find the contrast too harsh. Again, think about the subject and the intent of the image before making a decision.
All the images up until this point where shoot in-camera using ACROS, except for the pencils of course which were shot in colour (and actually on a Canon EOS50D back in 2013!).
I like the range of tones that ACROS produces. Often I deliberately shoot monochrome during dull days where colour isn’t really an option. During those conditions I am not shooting the sky at all, but deliberately looking for textures, things with contrast that look good in isolation, and making very intentional decisions on composition. It is not that I don’t consider carefully composition at all times, but that monochrome composition is so immediate you cannot escape it.
Monochrome encourages you to really look at what you include and what you leave out of your composition, which is why it was always taught first in art schools and colleges. It was often commented that it was taught first because the processing was easier (it isn’t) or cheaper (not true either), but the truth was that shooting in monochrome cannot be lazy and so the immediacy of it in the curriculum was used to make you learn to look properly.
This is also why you would be encouraged to learn to draw before you learn to paint. Learning to create anything in art is learning to see before you learn how to render that in any media. You learn to see light and shade, form and texture, shapes, and so forth. You stop the natural habit of labelling things, and seeing in different terms. You also learn to see what to leave in, and what to leave out. In some ways it teaches you composition almost by default.
If you want to get to grips with your photography, or just take it in a new direction, then shooting in black and white will help you. And, when you do go back to colour you will be surprised how much those images also improve by the semi-automatic, or subconscious, application of the decision making processes you learned in black and white.
You will see from my site that I am a great fan of monochrome or limited palettes. I even specialised in shooting in a black and white documentary style as a wedding photographer.
I continue to use it today in my portraits, because anyone can take a selfie and capture a likeness of their physical selves, but when I take a portrait I want to capture the essence of the person rather than make a direct pictorial representation. Frequently I don’t event concentrate on capturing the face in great detail but in capturing that person’s character and personality. I try to create an image that speaks of the person to those who know them and informs even the casual viewer about this person rather than asking them to make a judgement about their mere countenance.
A word of caution here though; ACROS is not always the best setting for portraits because it can increase the contrast just a little too much thus creating issues for any hint of an imperfect skin, and face it (pun intended) who doesn’t have some imperfections. Again, it is a choice as part of the narrative as to what and how we portray this.
One of the difficulties of digital monochrome, compared to traditional monochrome films, is the lack of grain. This does mean that if you truly want it to look like film you might find yourself adding a little, but if you’re shooting in low light at the higher ISO settings this will add some for you without too much trouble. Whilst Fujifilm’s excellent high ISO capability is a bonus for much of a photographers work, it does mean that we are left devoid of some of those film characteristics which even their own film types once made attractive. Noise in colour is bad, but noise in monochrome can be a benefit. It gives us back that pushed film qualities and high contrast monochrome film grains we have otherwise lost. There are now a number of presets to create film realistic noise in our digital images, which is quite ironic given the huge sums Fuji-film, Nikon, and the other manufacturers have spent in the past twenty years trying to eliminate it.
Our love affair with different film emulsions has never gone away, at least not for those old enough to remember film emulsions that is. Photography, film, media, and art students now are hungrily buying up film cameras, and seeing for themselves what they are missing in this great digital age. Fujifilm have lovingly attempted to, and been largely successful at, creating film replication settings in-camera and many others have got in on the act with apps and presets, but noise and grain are not quite the same.
Film isn’t dead, it just isn’t necessarily an emulsion based physical artefact anymore when a digital artefact can do a decent job to replicate it. ACROS gives us another way into this without post production – and time with your camera is always preferable to time with your computer if you’re a true photographer.
Long live Black & White photography – in whatever form.