Well I did it. I cancelled my Adobe Photographer’s package subscription at the point of renewal. As I mentioned in a previous post, I am not happy to work from the cloud because it simply isn’t practical in the Highlands of Scotland where we struggle to get a mobile signal let alone wifi.
I have not been a fan of the subscription model, and being tied into a monthly contract for 12 months, ever since it was launched. Whilst I do appreciate it spreads the cost, you are then tied to it. I also resented being tied to Photoshop when I only need Lightroom, which was always the much cheaper free standing package.
So, what will I be using? Affinity Photo.
I have this on my iPad Pro and it’s superb. It almost makes me want a bigger iPad, as in one with more storage, so that I can use the pencil features. The desktop version I will have to get used to, and after over 25 years with Adobe it will be a big shift.
I might regret it, or it might be liberating. If I regret it then I can always take a new subscription with Adobe in due course, but at least I would do so knowing that I had given it a go without.
I have to say that after a couple of days processing two shoots (from Raw) with Affinity it is a good replacement for Photoshop but it doesn’t replace Lightroom. It is very difficult to accurately assess images without opening each one individually as it has no catalogue feature. I have downloaded Adobe Bridge, which is free, but it feels like too much of a compromise and increase in workflow.
I also find Affinity is very power hungry on the computing front and this means I have to wait for transitions to take place more than I did with Lightroom.
It has slowed my workflow down, and sometimes I am not noticing things until well into the edit which I would have seen immediately and corrected (like minor lens distortions). It probably doesn’t help that I have just moved to the D800 and am dealing with bigger files with more definition.
I have now downloaded a trial of On1 Photo Raw 2018 for 30 days to see if this is better suited. I still like Affinity on the iPad Pro, and I can see uses for it, but more for Photoshop than Lightroom type edits. I, as an ‘right in-camera’ type shooter that doesn’t use special effects, don’t really use Photoshop that much, it was Lightroom that I used most so I feel there is more work to be done.
3 Legged Thing are a British company that designs tripods with a very different attitude. They design a tripod as a modular concept so that it does more than just holds your camera. For information on that I would definitely recommend visiting their website because they will explain it far better than I can, and I don’t expect to use all the possible features or configurations.
They also design them to be a bit sexy…
Anyway, this is my initial few thoughts on the Punks Billy – currently the only Carbon Fibre tripod in the Punks range. I would like to say that I purchased the Billy with my own money from Jack the Hat, and that neither 3 Legged Thing or Jack the Hat have paid me to write this and all opinions contained within are my own.
The reason I purchased from Jack the Hat and not directly from 3 Legged Thing was the delivery service. Jack the Hat delivers to the Highlands and Islands postcodes of Scotland without any fuss and even next day using Royal Mail Special Delivery by 1pm. Sadly, 3 Legged Thing does not, and I wasn’t in a position to wait for a courier to sit on my delivery for an extra day just because they don’t like my postcode (even though I’m about a minute from the main Inverness-Aberdeen road which they drive along more frequently).
In this review I am not going to write about the specifications for the tripod because you can get them direct from 3 Legged Thing’s website here. What I am going to write about is how the tripod shapes up in actual use.
When it first arrived it was in a very funky box, and struck me as being very well engineered, with excellent accessories, but sadly not including spikes as standard. It is possible to buy more feet, and three different ones for different terrain are offered, but this does then increase the overall cost. Given that two of their main competitors; Benro and MeFoto, both send their tripods out with a set of spikes included it is a bit disappointing. It should be said that you do generally pay quite a bit more for many of the similarly specified Benro tripods so it could be argued that you’re paying for them anyway.
When I put Billy up to his full height, I thought he was less stiff that I had expected. To be honest, I was a bit disappointed at the time, and somehow I needed up with a very odd angled image of it in the kitchen.
Billy (and Travis) are two of the taller tripods and as an added bonus for me, being only 5ft 3″ that means that without the centre column the camera is still at veryclose to beingeye level. I like removing centre columns as it allows a tripod to go much lower, reduces carry weight, and so I feel it gives me more flexibility. The image above shows it with the centre column but I then took this out (very simple to do) for the shot below, and used it without the column for my first outing.
As it was blowing a hoolie as we say up here in Scotland. I took it to the beach on the north sea coast to see how it would cope. Putting the camera on it actually made it much more stable, and even having the legs at almost their full extensions and splayed to the middle of the three leg positions, I was not more impressed.
The leg with the orange band at the top unscrews to become a monopod which is part of the modular design of the tripod, although I am not a great user of monopods it might prove handy.
Carrying it on my rucksack was a doddle and I didn’t notice it was there as its weight is very minimal for the support offered. It does fold like a travel tripod; the legs go fully up the other way to that show in the image, so the head sits between them, but when on my tripod this configuration works better for me.
I really liked the big chunky grips on it as the air temperature was barely above freezing and the windchill was making it considerably below. I was using fairly thick gloves for every moment except the final shooting, and it operated fearlessly with my gloves on. In Scotland this is very important. Big grips and larger knobs are very useful.
Carbon Fibre comes into it’s own in the cold. It is way nicer to handle that Aluminium and I was actually glad the Travis (Billy’s non-carbon twin brother) was out of stock. Billy is basically the same as Travis but being carbon is around 220g lighter whilst, evidently, being stronger for it too. It would have been nicer still if one leg had a leg warmer, but rubber please not foam as the foam ones soak up water. A couple of strips of the same rubber as is on the leg adjusters would be nice. It would give you more grip in the wet too.
Using the centre column enables you to use the ‘Toolz’ carabiner to attach a weight, such as a water bottle, to the bottom of the centre column via its hook. This also can aid stability although I didn’t find it necessary even in the gale force winds I experienced.
Having removed the centre column you loose that attachment point but you still have the three eyelets on the head attachment plate which you can now use for the same purpose amongst others. This would place the weight very slightly off centre in its attachment but if it’s handing this should still be ok.
I have constructed a three way sling using three accessory carabiners and a piece of cord which I can rest bottle or even rocks in. One carabiner into each hole on the plate and the cord suspends between them. I didn’t use it on this outing, and it may just live in my bag unused. I wouldn’t be out in conditions much more difficult that I encountered today so this was a fairly good forward looking test.
I started off on the beach getting shots of the crashing waves and I was very pleased with the results (see above). The tripod held my Nikon D600 with Nikkor 14-24/f2.8 lens (which is not light) very securely, much more so than my MeFoto Roadtrip does. Already Billy was proving he was worth the money.
I moved on from the beach at Kingston (sadly not Jamaica) to the sea wall at Portgordon, and the variable leg angles proved very useful. My MeFoto Roadtrip annoyed me a lot by having less positions, but the Billy has three very useful angles and so I could actually have each leg at a different angle to take into account the terrain. Billy had one leg set short and at the most extreme angle sticking onto on the sea wall (which I was hiding behind), one leg in the middle position on the rocks to my left side, and one leg in the most upright position and on the debris and pebbles to my right (seaward) side.
The wind was seriously strong and I was struggling to stand up in the gusts, which shows what Billy is capable of standing in.
Using this configuration meant that I personally was being bent over a bit more than I would have liked and I actually wished that I had brought the centre column with me. I would also have like a bit more height from an aesthetic point of view, to get higher up onto the waves and to capture the swirling seas coming into the harbour. You live and learn, and I have already put his column back in for the next trip. Removing it is simple and it can always live in my rucksack if needed. It really doesn’t weigh enough to make a substantial difference.
After not being initially confident in the stability, and having a concern about the tripod being so light it wouldn’t stand up to wind, I was really pleased with the performance so far. Admittedly I did find as much shelter as I could in my shooting positions but that was more to do with my staying warmer, and reducing spray, as it was giving Billy the best the chance.
As the hail started to fall I had moved along the coast again to Strathlene near Buckie, and took temporary residence inside a beach shelter.
I could work with Billy at full height (minus the column), using my heaviest lens, without any issues at all. I was out of much of the wind, although the hail was finding every conceivable gap.
As the quick release plate is compatible with Peak Design products, so I was able to use my hand strap and the tripod at the same time. This was great security for when I released the camera from the tripod, and convenient. There is no safety mechanism on the release of the camera quick release from the head; you absolutely must have a good hold of the camera before you loosen it. I know some reviewers have moaned about this, but it’s just a case of forming a working practice (or habit) to get around it. I don’t see it as a problem because, to be honest, you should have a good hold of the camera at this point in proceedings anyway.
The hail continued but I still managed to get some decent shots:
Having frozen my arse off for a couple of hours I decided to make a break for a cafe to warm up, and the public car park proved to be both my undoing and Billy’s.
The public toilets were closed but they didn’t let you know that until you’d gone up the chequer plated slope to the door, which meant you then had to come down again. I hadn’t realised that the chequer plate slope would be colder than the surrounding ground, and with the previous rain combined with spray coming off the sea, it was covered in a thin layer of invisible ice. The car park itself had some puddle but these weren’t properly frozen so I hadn’t worried.
Completely unprepared, I slipped on the ice and was airborne from the top of the slop, for a few milliseconds, before crashing onto the tarmac of the carpark at the end of the slope.
Poor Billy got a few war wounds in the process, but at least it will give him some genuine Punk character I guess. I was bloody annoyed at the time. First outing too.
My left knee and my left hand didn’t come off too well either…
…I guess I won’t be playing Twister for a few days.
My camera equipment, cosy within the Lowepro heavy duty padding and armoury of my Whistler 350AW was absolutely fine. Thankfully.
Although one trip, two if you count falling over, really isn’t enough to make a full review or judgement on Billy, I have to say that over all I am, so far, I am impressed. I would have liked slightly thicker legs, but that’s probably more for my confidence than because I feel they’re actually needed. I come from the old heavy tripod is good school, although I detest carrying them.
I am delighted by the three position legs, and the removable centre column. I love the weight and ease of carrying. I love the chunky grips and the smooth running head, although I would have really liked the head from the more expensive range with its built in panoramic bit.
Had I the requisite £400 then I might have gone for the Albert to gain some extra height but that’s because I spent a lot of time on the side of lochs and I do like to put the legs in the water, and so its feet are often a foot or more below my feet, but given the price difference and the colour way (which is way more me), I am very happy so far.
Because I like to put the legs in water, I also like tripods which you can easily take apart and clean or dry out. 3 Legged Thing make lots of the tripod user serviceable and there are great how-to videos and exactly what you need to do available on their website and YouTube channel.
I would like an L plate thing because I’m a landscape photographer and lazy, but then would it interfere with my use of the Peak Design hand strap?
I would like a set of free spikes included, and as it stands that adds to my cost, and so does adding the panoramic bit for the head which is also available as an extra. The Punks range is the cheaper range of the two 3 Legged Thing offer, but don’t let that fool you, these are not cut price or cheap tripods. For the money, I have to say it is one of the best I’ve every seen and knocks spots of other similarly, and many more expensively priced, tripods.
No, it’s not a Gitzo. But then neither is Gitzo anymore (it’s a rebranded Manfrotto by the look of it and not the same quality as the original).
The Billy and the Travis are the most conventional designs from 3 Legged Thing, and I like them all the more for it. I’m not big on centre columns as you can tell, and I remain unconvinced about telescopic ones.
I anticipate that Billy and I will have a long relationship, although possibly not leading to marriage, and I will update again in due course with some longer term observations. Until then, enjoy my site and please take time to comment, like, and share as it does my Google rating no end of good. You never know, one day I might even make some money at this, and if you want to buy me a cup of tea in the meantime, there is a link on the menu to Paypal Me. Thanks for reading.
I really wanted to move to mirrorless cameras. I was keen to explore a lighter, smaller, more compact and cartable photographic experience. But, I needed to retain the same quality, or improve on what I had. It didn’t quite work out as well as I had hoped and so I’m now back with Nikon, well over a grand down in the pocket for the experience, and a whole lot wiser.
What I am going to say will be controversial to some readers, and that’s ok. Please remember that it is my very personal experience that I am relating, and not a statement of fact condemning any manufacture, cameras, or whatever. Please don’t see it as an invite to send me nasty messages or comments. They might even get published so you will only embarrass yourself. Oh, and all the images are Copyright of me so keep your mitts off.
For me, it started with Fujifilm – the X-Pro 1 came out with two free lenses, the 18mm (not really wide enough), and the 27mm (hmmm, ok as a standard). I loved it, and I took some great photos. But I wanted convenience of a zoom, because I spend a lot of time in wet conditions and I have a tendency to drop things…
I also wanted consistent f2.8.
I had a little trouble holding the very flat body when I was used to a more hand friendly shaped grip. My back and shoulders loved the experience and the photos were top quality, but I would have liked a wider wide angle and I would have liked better focussing, oh and longer battery life. And a zoom with f2.8…
A zoom, any zoom, didn’t feel good on the rangefinder body, at least to me. It made the whole camera holding experience even worse. The X-Pro series is designed for fast primes, it is what they really excel at. But, I am not a street photographer, I’m usually found in fields, up to my arse in mud, frequently in the rain; I live in Scotland. The X-Pro 1, I don’t think, is weather sealed. I didn’t tempt it.
The lens range simply wasn’t there for me, not at that time. I do object to being forced to buy lenses just from Fujifilm. Ok, I have had Nikon bodies with Nikon lenses, but I have also really enjoyed some Tokina lenses and one (and only one) Sigma lens before.
So, anyway, it went away and was replaced by a Nikon D7100, which was all I could afford at the time. But I hadn’t quite got away from really wanting something smaller and lighter, especially at the end of 15mile hike. So that went away to be replaced by the Fujifilm XT-1, which was so much better suited to the zooms than the rangefinder bodies. I still struggled to find a zoom that met my needs, until in the end I got the 16-55mm/f2.8. It is an amazing lens, except that it is actually about the same weight and size as many DSLR lenses, which makes it very front heavy and somewhat unbalanced on the XT-1. I bought a grip, it was better, but now my camera weighed what a DSLR did and took up more space in my bag than my Nikon D7100 did!
It felt like it always wanted to fall forward, even on a tripod, and I had to really make sure it was secure. The lens weighed more than the body and it was huge by comparison. I wasn’t saving much weight, it was awkward to hold, but the results were great and I persevered. I love Fujifilm’s film simulations, nobody does it better, but…
Then the Fujifilm XT-2 came out, and it offered (allegedly) a number of improvements over the XT-1. These, to me, included a flip out screen that went in two directions so you can use it in portrait as well as in landscape, and a jog-stick thing for moving the focus point. Believe me, it was a bit of a pain moving it on the XT-1. Unbeknown to me, my (bought used) XT-1 developed a row of dead pixels, and so I was delighted to part with whilst still under its used warranty (by three days, phew) and so I got a decent deal. It wasn’t very old, and it hadn’t take that many shots so this worried me, and it sat like the elephant in the room over my decision to stay with Fujifilm. I have used Nikon camera’s for years and never experience a dead pixel issue. Jammed shutters on Canon cameras have blighted all three I have owned but never had an issue with Nikon…(and hopefully that hasn’t just tempted fate).
I got my XT-2 brand new. It was like “hens teeth” to get one new, and it would be months or even years before any appeared on the used market. I was concerned by the amount of money I had now invested, and that dead pixel issue reared its head again when I found the XT-2 came with an option for pixel re-mapping in the menu. I wonder why they put that in….? Perhaps there had been complaints.
(Incidentally the OM PEN-F has that option too)
Anyway, more great pictures followed. Although to me, they weren’t actually as great as the ones from the XT-1. The new camera gave me 24MP but to me, there was something I can’t define that was missing from these images that is there with the lower 16MP images from the XT-1. Maybe it’s colour, dynamic range, I don’t know. Sometimes you just find something you like in a camera and moan when they change it. I had the same thing with the D200, the last of the CCD sensors. I still to this day like the look of a D200 image over a D700 image, and I shot both at the same time.
But back to my story – I now wanted more lenses, and the ones I wanted were all large, heavy, and to be frank they are darned expensive. You still have to stick with Fujifilm or go fully manual with a very excellent Samyang. The other odd thing that kept striking me when I picked it up and used the dials was that the XT-2 didn’t seem quite as well made as the XT-1 and I had concerns bit were going to drop off it. They didn’t but I was worried…
I know there are reports online of dials breaking so maybe my concern wasn’t totally unfounded. I didn’t see these until after I’d parted company with it, so they didn’t influence my decision.
If I had the money, and the desire, to go out an buy a mirrorless camera today then I think I would choose the XT-1 over the XT-2. It really does feel better and I actually preferred the results.
I personally think that 16MP is the peak of perfection for a 1.5x crop sensor and that 24MP pushes it too far. But that is me, and every time I post a negative comment or review I get hate mail, but there you go. That’s the internet for you!
To me, with the big lens and with or without a grip, it still felt unbalanced,. You put a heavy, big, lump of fast glass at the front of a body which ways less and has a small hand grip then it is going to.
I really began questioning my missing of the DSLR lens to body balance. I certainly wasn’t saving that much in weight, or size.
To be honest, I have never thought that size is much of an issue. It is more to do with the weight of what you are carrying that determines how pleasant that 10mile hike is going to be. My camera bag remains the same and so I just move padding around to accommodate the size of the items within. I think there is where actually mirrorless manufacturers are going wrong. Having a decent size gives you a secure and comfortable grip in use, and this doesn’t change because hands are, basically, still hands. It isn’t space that’s an issue for me, it is weight.
Also, I am used to carrying my DSLR one handed, it’s just the way that I work. My Fuji’s both really required me to get neck straps because they weren’t comfortable in the hand for very long, and I have real neck issues. My neck issues were one of the reasons I wanted to lighten the load, so I definitely didn’t want my camera back around there again. Without having something to tuck your fingers around it isn’t comfy to single hand hold and wander about with. So it the camera goes around your neck, or in your bag. If it’s in your bag you take less pictures.
I figured that if I was going to go light, then I wanted to be balanced and really light. I wasn’t convinced by the argument that a bigger sensor is better, I think it’s down to the number of pixel balanced with the size of the sensor. A bigger sensor can take more pixels of the same size as a small sensor, if that makes sense. I think, from my personal experience that there is a optimum point. With a compact it’s 10MP, with a 4/3rd it’s probably around 12MP, with 1.5x crops it’s around 16MP, and with full frame 35mm then its around 24MP. That’s my best guess. Yes, if you are printing big enough to notice the difference it will be important, but most of us aren’t.
I also don’t buy the whole thing of needing lots of pixels even when you do print large. I’ve printed to 6ft x 4ft fine art print from a 10MP Nikon D200 native file, converted to jpeg from the raw, and I have printed A3 dps* brochures from a 3MP Nikon/Kodak camera (back in the 1990s) that was a lot worse than 90% of current mobile phones! But, the quality and ability to render colours and tonality is vitally important, more so than how many you have.
I firmly believe that dynamic range is very important, because if you increase that then you already reduce the noise in the shadows and reduce the chance of burned out highlights. You reduce the compromises, and you reduce the need for external filtration. I want cameras to see the range we see, and we are still a long way from that. The human eye is very adaptable, not so much as some birds and animals but way better than a camera.
So, anyway, I thought I’d switch to Olympus (and if you’ve read my other posts then you know how that turned out…)
I guess in the end part of it was that I really missed the familiarity that comes with years of using Nikon. The menus are familiar, the buttons are (largely) in the same place. I favour Nikon over Canon for two reasons (and here I start another fight) – firstly, in over 25 years, I have only ever had three cameras pack up mid-shoot and they were all Canon’s and all with terminally jammed shutters. Secondly, they move the controls and buttons about and I can’t be doing with relearning a new camera as you’ll also know from my things-i-dont-like-about-the-olympus-pen-f post
Ten minutes with any Nikon and I can use it, in the dark, or at least without looking. I take more photos because I’m not messing about in menus, trying to find things. It feels good in my hand. It feels like an extension of me, and that allows me to get on with the creative art of image making.
I keep more images, because I take more images, and because I am not messing about in menus and not getting the results I think I’m going to get. Or missing the shot because I haven’t found the settings I want.
So, I am going back to big and heavy.
Back to a weighty DSLR. Back to big heavy lenses (not that I went very far away with that bit).
I went to my local used dealer and played around with a Nikon D600. Yes, they have a reputation for dust but to be honest if you pick one up now then they’ve either not had an issue, been back to Nikon for free to have it sorted, or the original owner would have got it replaced by a D610 by Nikon F.O.C. So it’s probably now a bit undeserved, unless you get one from a really lazy owner. It does however make them daft cheap, for what you’re getting.
I played with it for ten minutes and it felt like coming home. It sounds silly but I didn’t need to look at the controls more than once or twice, and, within minutes I had the settings the way I wanted them and saved to custom memory. It was just comfortable…
And, I now I also have full frame! And with my ideal of 24MP.
I also now have balance! I can use the camera with one hand again, even with the bulbous wotsit (Nikon AF-S 14-24/2.8). The lenses, even the big ones, balance on the camera. I’ve gone a generation back to get the body, and spent the real money on the glass (always the best plan because you’ll change your bodies every few years but good glass lasts, well almost, forever).
My osteopath won’t like it….
But I do.
And hey, my DSLR with a little 50mm/f1.8 prime even weighs less than my XT-2 with the zoom.
*double page spread, ie. an A3 centrefold in an A4 product
The Billingham F-Stop range is one of those quiet little back burners that hasn’t really been appreciated as it sits in the shadow of the renowned Hadley range. But it shouldn’t, because it’s actually, I think from my initial impressions, a better bag.
Let me explain…
To the left there you will see my Billingham Hadley Pro that I had a love/hate relationship with. I loved the waterproofing, the style, the robustness, the look, but it was always, in my view, dimensionally ‘wrong’.
It was so deep that you lost your mirrorless in it and ended up with things stacked on top one another, but it was so shallow front to back that you couldn’t use it very easily for a DSLR, and certainly not one with a grip. It was trying to fit everything and ended up fitting nothing as well as it might.
I bought the Hadley Pro to replace the Hadley Small, which was actually a better overall size (not so tall, not so wide), but it has the same depth issue.
These bags are Billingham’s biggest sellers, so people do love them, and I can see why. The removable interior to create a great waterproof messenger bag is simply brilliant, although I never removed mine.
The Hadley Pro is W350mm x D120mm x H280mm, but that D is tapered so you only get 120mm/4.75″ in the centre. It weighs in at 1.01kg or 2.23lbs, has two front dump pockets and one zipped rear pocket.
I was very surprised when the Digital turned up having put on a little tubbiness around it’s middle. I was also delighted.
The Hadley Digital, which I reviewed yesterday, is W210mm x D130mm x H210mm and the internal depth measurements are most telling D100mm for the Digital compared with 80mm for the Hadley Pro. As I said, the smaller bag actually has more depth and because it’s across the whole width of the bag, that makes it far more useful. Especially for anything bigger than a very small DSLR, or bigger than an Olympus OM-D/PEN-F sized mirrorless camera system.
My almost favourite bag, possibly of all time, was really the Hadley Small, which comes in at W290mm x D120mm x H220mm, 0.70kg/1.54lbs. Although it is quite a bit less in the width, the fact it also isn’t as tall made it, for me, much better with a mirrorless kit as I wasn’t stacking so much up. The Hadley Small and the Hadley Pro are exactly the same depth at their biggest (in the middle). The difference in weight is partly down to the size and partly down to the inclusion of the reinforced top handle on the Pro, which is missing from the Small.
Now, lots of people don’t mind their bag bowing out in the middle to accommodate their camera bodies, I know this because, as I said, the Hadley range is Billinghams’ biggest seller and the Pro is the daddy of them all and Billingham’s best seller of all.
The thing was, I could never get comfortable with it. Which is what lead me to look for something that was essentially a Hadley Small, but with more front to back depth. I also wanted the ability to take an iPad with me again (Digital isn’t big enough and doesn’t have a pocket for it), plus personal items such as my phone and purse, and have all round all season protection for my gear. I carry my camera with me, everywhere, everyday. You never know when you’ll get that once in a lifetime shot.
So, meet the much ignored F-Stop. This example is the f2.8 (the f4 was evidently smaller but, quickly, discontinued, and the f1.4, which is still available, is a bit bigger).
The f2.8 dimensions are W300 x D150 x H240 (all in millimetres and external measurements). The internals are W270 x D120 x H190.
Compare that to the Hadley Small – external W290 x D120 x H220, internal W260 x D80 x H190. Internally, the f2.8 has 10mm extra width, which is neither hear nor there, but 30mm extra depth, which makes a huge difference to what bodies I can put inside and in what positions, and internally the height is exactly the same.
Compare it to the Hadley Pro – external W350 x D120 x H280, internal W340 x D80 x H230. I have less width, but I have again 30cm more depth, and I lose a bit on height, which I don’t actually need, unless I have a 70-200/2.8 to worry about. If I did want to carry the 70-200/2.8 plus more lenses I would need a bigger bag than either range anyway.
The f1.4 is even closer to the Hadley Pro – external W360 x D150 x H240, internal W310 x D120 x H190. I’d be losing a little height but I’d be gaining a whole 40mm of internal depth front to back and it goes right the way across. It’s boxy, but it’s good.
Both the Hadley Pro and the F-Stops have a rear zip compartment (not shown).
I still get quality brass fittings, although the straps can only be replaced by Billingham at their factor as they are not detachable by the user, unlike the Hadley range. I also get slightly less positions by not having the buckles, although to be honest I never changed mine.
The holes in the leather fittings are to attach 5/8″ tripod straps, which is another useful feature associated with the larger 7-series bags, which also share the same non-user replaceable straps. The Hadley range shares its fittings with the 5-series.
It comes with three inserts, the thick padded base and two dividers. One which folds over and one which isn’t quite full height and doesn’t fold.
These both velcro into place.
Personally, I didn’t get on with the dividers, and although they do the job I have whipped these out to replace them, for now, with ones borrowed from my Lowepro Whistler 350AW backpack.
I love Lowepro’s idea of making dividers also pockets. It gives you extra padded safe storage for those little things, likes cards and batteries, which move about and get damaged if left loose in the pockets.
I can move them back into the Whistler whenever I need to but they not only give me another storage space within the bag, but as they are much softer allow the Billingham to be less boxy. I can now press the Billingham more with my hip which make it nicer to carrier and more conforming to body shapes.
I don’t see why we can’t bastardise our bags with the best of each system, and they almost all come with velcro so it’s actually very easy. Ok, it might not look as cool but who is looking inside your bag as a style comment? Only you should be in it, and only your ease of use really matters.
At the moment, this is not really a review but an initial impression, as it only arrived yesterday and I have as yet only tried loading the bag with a number of configurations. The true test will come after several months of use and I will update this post with that review in due course (probably around the end of November/early December time).
Will this bag become the new favourite of all time Billingham and depose the Hadley Small? Watch this space…
I have owned a number of Billingham bags over the years, from the 225 and 335 that I used with medium format film cameras to the 307 which was just too large when I converted to mirrorless, via the Hadley small which became my everyday bag with the Fujifilm X series, the Hadley Pro as my lens collection grow only for me to fall out with it for being too narrow when I went back to Nikon (the first time).
When I went to Fujifilm for the second time, with the XT1 and then XT2, I got the Hadley Digital you see here and it became my everyday go to bag. In spite of that everyday go to use, it still looks almost new. That’s the thing with Billingham, they really very rarely die before your needs change and the second hand market remains strong so you never really loose hugely on resale values.
The Hadley Digital is the smallest of the Hadley range, and strangely it has more front to back depth (making it far more useful) than the Hadley Small or Hadley Pro bags. Underneath the rain flap you equipment is cosseted in beautiful padding with two dividers that can be moved or removed. There is also a front dump pocket which can easily accommodate memory cards, battery, phone and wallet or purse.
It proved perfect with all my mirrorless cameras, but I struggled to fit the Nikon D600 in it and still use the front pocket, or accommodate a second lens or flash, so I will be parting with it to fund (actually refund) part of the replacement – the much underrated and ignored F-Stop range f2.8.
It’s small and discrete and I will miss it terribly. It’s waterproofing and ease of use really has been second to none, but it’s just a little bit too small now.
If you’ve been reading my blog you’ll see that I reviewed the Olympus Pen-F a little while ago. Since then I have used this camera on a trip to the Isle of Skye, which I have also documented, and which sadly resulted in my having some serious second thoughts about my relationship with this beautiful little camera.
I love it’s size, I love it’s weight. It makes really excellent 8×10 prints (I haven’t printed bigger yet). But, for me, personally, as a landscape photographer, there are some real issues that have come to light.
Firstly, the Olympus menu system; I shoot raw and jpeg because I like to have the option of reverting to the raw file later if needed, but I also like the convenience of having a jpeg which meets my requirements as a finished image. My problem with this on the Olympus is controlling the jpeg in camera. I got spoiled with the Fujifilm system where you selected a film replication and knew exactly what you were getting. You didn’t need to tweak the colours, it was simple and effective. Now, I know this is down to me not having got the settings right as yet, but trying to delve into menus and options in the middle of a field in gale force winds is just not happening. Trying to see a tiny little adjustment colour wheel on a highly reflective screen, with even smaller nodes and really sensitive operation of the knobs and dials, whilst standing on top of cliff, in sunlight, is nigh on impossible. Trying to make valid adjustments with gloves on, totally impossible.
I know this is me, and that there is nothing wrong with the camera. But, I don’t want to take a degree in computer nerd to operate my camera.
In the end I decided I had had enough of messing about with the jpegs and set the whole camera to shoot raw only and fully manual. I’d deal with the processing after. The trouble is, that isn’t what I bought the PEN-F for, and it’s a waste of its extensive talents.
They say familiarity breeds contempt but with equipment that isn’t true. I have used Nikon cameras for over 30 years, right from film and through the first digital cameras which were Kodak/Nikon hybrids. Nikon, unlike a lot of manufacturers, keep pretty much everything in the same places from one body to the next. The menus have the same titles, and the same order. Sure they add new things but it’s logical. Sure, sometimes buttons moved or can be programmed, but its logical and it takes only a few minutes to find where the stuff has gone to or what’s new. I can operate a Nikon in the dark, like an extension of my own being. It is familiar to the point that I can pick up any body and lens combination and make it work without thinking about it.
This means that I am concentrating on my composition, on actually taking the photo, and not operating the camera.
Anyway, as I said, I switched the camera to raw and manual which kind of turned it into a Fuji…which leads me to the second thing:
I like to use filters to get shots right in-camera, first time. This includes graduated neutral density filters. Now, I’m not a complete numpty and I did leave the 100mm filter system at home (and there is no way to get rings to attach it to the tiny filter sizes of the Olympus lenses anyway). I took a Cokin P sized system with me, with three hard grads, two soft grads, a polariser that didn’t fit the holder (which is another story…), and stepping rings to take the 52mm filter size from the 9-18mm lens down to the 3something-mm of the standard lens. The soft grads were unusable as the graduation change covered more than the actual diameter of the biggest lens, so you couldn’t get the effect at all, just a graduation across the whole scene or a very weak transition of grad over around half of it. This was pretty useless, really. It was also a right bastard to line anything up because the viewfinder is small and the screen is hard to see in bright light. Why can’t they make screen matt?
So, I, and I do mean me, can’t get to grips very quickly with the jpeg options in the field, because I find that they’re too fiddly and too annoying. And, I can’t use filters. And, I’m shooting mainly landscapes.
When I get home, in spite of the issues and how much the Olympus annoyed me in use, I did enjoy the result and was impressed, to a point.
Point three – 4:3 ratio images are odd, to me. They are not quite square and not quite rectangular enough. I ended up turning most of my images into squares. I found that cropping the image to create a more landscape shaped landscape meant a very small file size ensued or, because I had composed the shot with the full size of the sensor in view, I was cropping out bits I actually wanted. Printing onto normal paper sizes also meant cropping off part of the images, which changed the image composition in ways I didn’t appreciate. It was sort of like shooting 6×6 film knowing you’re going to crop to a rectangle so you leave a portion of the frame as unimportant to the composition as you know you’ll loose it. The thing is, with a small sensor like the micro 4/3rds, you don’t have a lot of room for aggressive cropping.
Fourth and final point – the lenses are have are impressively sharp, and they are tiny, which has advantages when hiking, no denying that. Chromatic aberration is well controlled although distortion with the 9-18mm isn’t in raw and there is now automatic adjustments available with a Lightroom profile. This means manually fixing each image, which is fine. It’s not a big job and you do expect that with any ultra wide, especially if its a zoom.
I know the Pro lenses are better, but they don’t suit the PEN-F build. Putting a standard zoom on the front of it makes it front heavy. This doesn’t bother some people, but it does bother me. I had the same issue with the Fujifilm system; the pro fast lenses are the same size pretty much as DSLR lenses but the body is half the size. I found the XT2 with the 16-55/2.8 uncomfortable in use, and weirdly balanced on a tripod, requiring a heftier tripod that I would have liked. This was why I moved to Olympus. To get a balance between the lenses and the body. Perhaps I should have gone for a more traditional SLR shaped body rather than the PEN-F? Who knows.
So, what is the conclusion, my conclusion to this exercise?
Well, I still have the PEN-F kit at the moment because I do appreciate the light weight flexibility. I also think that for travel, where weight or bulk is an issue they can’t be beaten. I also think that for street photography or walking around in areas where you might need to move quickly or surreptitiously they’re wonderful. I never shot street photography until I got the PEN-F because I felt too self conscious. I have depression, and anxiety issues around groups of people, as readers will know.
But….I did just go and buy a used Nikon full frame (FX) D600 body, and two used lenses. It took me around five minutes to set up the whole camera from a factory reset to the way I like my camera setup. I did it whilst having my sandwich, one handed. I then went out and shot roughly 30 images on the way home, in bad light. I loved the reassuring noises it made, even if they were damned loud to start with compared to the Mirrorless cameras I am used to now.
I was reticent about the weight although, the XT2 with its 16-55/2.8 only weighed around a mars bar less, ok two mars bars. I would carry that weight back in extra batteries because the Mirrorless XT2 would get 350shots a charge compared to 900+ with the Nikon DSLR.
I shot in low light, bright light, with and without a tripod, with and without filters, and I rarely looked at the controls. I shot everything in raw, in 14-bit, and then I sat at my computer and admired the detail in the trees and leaves that I simply don’t see in the Olympus images. Yes, I was pixel peeping, because I wanted to do a detailed examination of the files. Then I printed one image out and it fitted to the paper without loosing more than a few millimetres. The whole image, 3:2 ratio.
It has more tonality, it has more detail. Even just printing on an A4 sheet.
Where does this leave the PEN-F? To be honest the jury is out. If someone makes me a good offer then it will go because I need the money back. I will take the Nikon out for a few days and see how I feel about carrying the weight and bulk again. If I decide that actually, with a few manual primes the set up will be just as light and efficient, or near enough, then there is a very good chance I will switch back to a DSLR system completely. I don’t know yet. I’d like to keep both, but that’s not really an option.
As you’ll know if you follow my blog, I recently switched from the Fujifilm X series to the Olympus 3/rd system, moving from the XT-2 to the PEN-F.
The Fujifilm system is renowned for the quality of its in camera Jpegs, and I have written on the subject in relation to social media client use, and to using the ACROS setting in my blog. So, logically, I wanted to see if the jpeg output from the Olympus PEN-F would be as good. In order to do this, I shot a whole day on the Mono 1 setting for my Superfine Jpegs (its a hidden menu option, more on that here), but also saving the raw files. I then processed the Raw images in Adobe Lightroom (LR) as this is the most common development program.
My Mono 1 settings are for +1 contrast and +1 sharpness, with added fine grain because I like the film effects, as you’ll know from my ACROS usage on the XT-2. Raw files were processed to add +30 up to +50 sharpness, and to change the profile to Camera Mono so that they would end up, in theory, as similar to the Superfine jpeg in tone etc. I wanted to see how much is lost with the in-camera process to jpeg compared with the, probably superior, LR process of the raw file. The results are quite interesting:
This is the most telling shot of all and the one I looked at first on my Mac. It was this pictures that made me decided to process the raws to monochrome and to provide this series of comparison images. As you can see, I was able to recover the blown highlights on the back of the white pony from the RAW, but the jpeg continues to look slightly ‘sharper’. This may be raised mid-tones, increased sharpening, I am not sure at this stage, but the result is definitely interesting and supports the use of Raw in many situations.
With this shot, I could again pull back the highlights of the image generally, which would suggest that I considered shooting with some negative exposure compensation or reduced the set construct amount from my +1 setting back to 0. In Raw processing I was also able to add a false graduated filter to the sky to increase significantly the cloud detail in the sky to create a more balanced image. This would suggest that I should have used a ND Graduated filter at the time of shooting, if I wanted to use the Jpeg. Adding a false filter in LR afterwards wasn’t an option as it increased the noise in the image and made the grain more noticeable in the sky than the rest of the image in an unpleasant way.
Again, the Raw image wins for post production abilities as we would expect. But importantly it also shows us what could have been achieved in-camera with a little more thought perhaps at the time, and using the correct filtration.
With this image, taken from the same spot, there is very little to notice between them at all. I have corrected the verticals in the Processed image but not in the jpeg and I did this so I could easily tell them apart once posted into this blog and I could no longer see the filenames. That is a reflection on how close they are. If anything, I prefer the in-camera jpeg on this occasion, and would correct the verticals for use. I think it appears slightly sharper and there is more detail in the sky. It is strange, because although they were taken just minutes apart and from the same place, the sky recovery from the previous shot was better in the raw image processing and the in-camer jpeg would not have been my choice.
With these too I am really struggling to tell them apart. I think the jpeg looks somewhat ‘cleaner’ which makes it look a little sharper. As a side point, I have put the file sizes in brackets as part of the captions. Bare in mind that the original raw, unprocessed, would be colour so we would expect it to be higher due to holding the additional colour information. The superfine jpeg is still a decently sized file, and all of these files from the shoot ranged from 13.6MB – 15.5MB straight from camera. The raw files ranged from 17.7MB – 20.2MB in size. Both are more than adequate to produce some very high quality printed images.
With these two final images I am again struggling with which is which and if there is a difference, albeit minuscule, I would say I have a preference for the jpeg because, again, it strikes me as a ‘cleaner’ image. The camera is definitely doing something to increase the clarity, in my opinion. To test this, I tried raising the contrast slider by +30 in LR, and this appears to confirm my theory and I then really can’t tell the difference. I would assume this comes from my having added a ‘red’ filter to the creative control on the mono setting at this point in the shoot. I had forgotten about that until I checked the camera!
It would appear to get the very best out the jpegs, don’t use the plus or minus contrast setting as this is too clumsy, but use the colour defined filtration options in the customisation of the art settings. This was one of the attractions of the Olympus system, the ability to add ‘filters’ in-camera. If the raw file is saved alongside the jpeg you can always then change the whole image or effect later.
For the creative black and white shooter, the Olympus system offers a real opportunity to create substantially large and good quality jpegs in the camera at the time of shooting. This reduces the amount of time that anyone would need to spend on their computer and so give them more time to create new images out in the real world – ie. time with their camera being a photographer rather than in the office or studio glued to a monitor.
Shooting raw at the same does enable you to have a back-up, either for when you were trying to work quickly in the field and didn’t quite get it right (such as not using ND grads etc), and it gives you the options of changing your mind and not having the art settings at all and producing a completely different image. The choice is really up to the photographer and what they want their images to say, coupled with how they like to work. Memory is cheap – shoot both.
Generally with the exception of the image of the ponies where the highlights were blown out, I preferred the result of the in-camera jpeg and will therefore remember to use my grad’ filters more often. But, shooting both means if I’m rushed, it doesn’t really matter.
The whole point of going to a mirrorless camera, for most people, is to reduce the weight and bulk of their camera, and lenses. Having moved from Nikon to Fujifilm I thought I had done just that, but was it enough? I thought so, until I bought a f2.8 pro’ grade lens for the Fuji, and then I wondered why I had bothered. Yesterday I met the Olympus PEN-F – smaller, lighter, and with relatively inexpensive lenses. Would I be convinced enough to change my whole system again? Let’s see…
Let me give you some facts to consider, based, solely, on my own photographic experience; firstly, when I started in digital photography back in…ahem…1995, we had a Kodak DCS camera in the studio at work. It boasted all of 1.5MP and had a 2.6x crop sensor. This is compared to the standard, 35mm film camera, by which are still comparing our camera and talking about relative sizes to this day. If you want to skip this bit, and I admit its longer than I planned, then scroll on down until you get to the subheading – MY FIRST OUTINGbelow
I used that camera both in the studio and on location, and we were only the 9th fully digital commercial studio in the UK. The reason we were the 9th was simple; a decent digital camera would cost about the same money as a two-bedroom terraced house! I am not joking – £34,000 for the 6MP version, which would quite literally at that time, have bought you my house.
Why am I telling you this? Because we printed our brochures with photos ranging in size from a just couple of inches across right up to A3 equivalent double page spreads, and we did so with images from this camera. Yes, 1.5MP source image was printed to an A3 double page spread, on a commercial press. This is important because whilst I admit the images were nowhere near as good as scanned 35mm transparency film, and I was more used to 5″x6″ positive film, we were doing it in 1995.
So for me, the great megapixel race has never been of interest. I also think it was over around the 16MP mark to be honest, but there you go.
This is relevant because I now have more megapixels in my phone and I (almost) never print those images. I also have a tiny sensor driven Nikon P900, as you’ll see from other posts, and I am more than happy to print the images from that at A4. I also sell them via a stock agency. Yes, little bitty sensor generated files are accepted, if they are good enough, by quite a lot of places contrary to what the full frame fans will try to have you believe. It is also relevant because I used to be a full frame fan – I had a Nikon D700 full frame 35mm equivalent digital camera, and to be honest, the images from the second body 1.5x crop sensor Nikon D200 frequently outsold it. Sure, the D200 wasn’t a quick, wasn’t as good in the dark, but if you worked within the known constraints the images were fine and frequently got printed to canvasses over 4ft wide. I think the CCD was far superior for image quality than the ‘MOS sensors but like Betamax and VHS it was commonality not quality that won the war.
What has this to do with the Olympus Pen-F? Well in order to get smaller bodies, and smaller (and cheaper) lenses, as well as smaller and lighter cameras, the sensor really has to be smaller. I am odd in the photographic world because I have gone from 5×4″ film, to 6×6 film, to full frame digital, to APS-C , and then to Micro 4/3rds. Most people go in the opposite direction, but maybe without the film.
The Nikon D700 was a 12.1MP camera and the body weighed in at 995g. I used it with a 24-70/2.8 and a 70-200/2.8 lens, which weighed 900g and 1,430g respectively. That means, aside from accessories, I was carrying 3,325g or 3.32kg of just bodies and glass. This is why I have two trapped nerves, one in my neck and one between my shoulders. As well as carrying this, I was often shooting with a second body (the D200, 10MP by the way).
Due to my original neck issue, I then played around with a Fujifilm X-Pro1, but went back to Nikon because it wasn’t doing what I wanted, and got an APS-C sensored D7200. At the time the focussing was too vague and often s..l..o..w.. and the lens choices were far too limited. After doing myself no good carrying the weight again, I then went back to Fuji for the XT-1. By this point there were many more lenses, although still only offered by Fujifilm and Samyang. Exceptional though all those lenses are, you are still very limited compared to Nikon/Canon. Eventually after a number of false starts with some primes, that I nearly dropped in the soup a few times, I ended up with the Fuji XT-2 and the Fuji XF16-55/f2.8 lens. I do not like to miss shots changing lenses, or try to find places to put things down in the, generally, muddy environments I often work.
My quest to reduce weight had now only been partially successful – I now had a body which weighed 507g and a lens which weighed 655g. Yes, that is correct, the lens weighed more than body and two totalled 1,162g or 1.162kg. It was also not that much smaller than my mirrored DSLR body and favourite lens combinations had been. Most of this was down to that lens. Gorgeous thing that it is, and image quality to die for, it is big and heavy. I also wanted more lenses but simply could’t afford them. I analysed my shots and found I shoot a lot of image as wide as I can with the 16mm end. I would like wider, and I would like longer. I don’t actually shoot much in the middle funnily enough.
Now, don’t get me wrong here. I am not going to dissuade anyone from buying into the Fujifilm system. It is a professional workhorse system with very professional quality images. I have, quite honestly, never seen images bettered by any other camera I have used. I have sold countless images from the XT-2 and the XT-1 before it, but these were images that were shot when I could be arsed to carry it, and there is the nub of the problem. Most of the time I just couldn’t be arsed. I didn’t want it around my neck, because frankly it hurts, and if it went into my bag then it very often stayed there. Putting all the stuff down to get out the camera would often mean I had missed the shot anyway, and after 10miles I rarely had the energy left to try. I love walking, but I do not like walking when everything hurts and you fear putting down your bag because you know you don’t want to pick it up again.
Here is my kit in a rare moment on the Isle of Skye. I haven’t stopped to take photos, I’ve stopped for lunch. I did take some photos, as you’ll see from my previous blog entry, but I feel I have become someone who is shooting out of necessity, for documentary, and not because it is actually ‘fun’ anymore. I miss the fun. I want to feel inspired and to try things again.
That Gitzo tripod is super wonderful too – and it weighs in at just under 3kg. It was overkill for the camera really, but I like stability in high wind, especially when on cliff/mountain tops. That rucksack, required for all the kit, accessories, waterproofs, lunch etc, also weighs 3kg (empty).
I worked it out that on an average days hillwalking and shooting, I would be carrying at least 18kg, and I just stopped wanting to do it. I wasn’t enjoying being out and worse still I wasn’t enjoying my photography or feeling creatively inspired and that is the crux of the matter.
When I first moved from the Nikon gear to mirrorless I went with the Fujifilm system based on image quality alone. At the end of the day a camera is a tool for taking great images, and to me, hopefully selling them.
At the time of my change over from the Nikon, I did look at the Olympus OM-D system. I had loved Olympus’ film cameras from the OM range. I had several and I really coveted the OM4Ti, although I could never afford one. Sadly by the time I could Olympus appeared to be on their uppers, they had stopped making the OM series, and so I moved to Nikon.
When I moved from Nikon to Fujifilm, as I said, I did look at the OM-D range but I just wasn’t convinced. I didn’t like the feel of the OM-D cameras in the hand, they were actually just a bit too small. In spite of what a lot of people claim, I wasn’t convinced by the build of the original OM-D cameras, they felt, well…cheap.
Funnily enough, the PEN-F, despite being a rangefinder style actually feels more substantial than the OM-D bodies I have looked at, even though it (probably) isn’t. It is also gorgeous to look at, OM4Ti gorgeous, and its really REALLY well made. I actually have more confidence in the build of the PEN-F than I did the XT-2. I guess its those machined dials. I know I said they are tools, but ask a mechanic if he wants a spanner from Snap-on or B&Q. If you enjoy using your camera, you will use it more. Like anything I guess.
So, let us also look again at that weight again – the PEN-F body is 427g, saving me just 80g on the Fuji XT-2. Not worth it really, given I would lose a fairly big lump of money from my investment changing systems. But, here is the real difference. You see that lens? Well that baby weighs just 155g. The Olympus 4/3rd is a 2x crop sensor, so a 9-18mm is an 18-36mm equivalent. The Fuji X series has a 1.5x crop factor so the 10-24mm, Fuji’s nearest equivalent, is a 15-36mm. The Fuji weighs 410g. So now I have saved 80g on the body and 255g on the lens, a total of 335g. But it gets better still when you look at the other lenses I might need – because I don’t really need a f2.8 with the excellent image stabilisation offered by the PEN-F body, I went for the kit option with the 14-45 lens to replace my Fuji 16-55 coverage. This means I am now comparing 93g to 655g, saving, well, you do the math and you can see where this is leading.
Because I’ve also reduced the lens sizes and weights, I also don’t need a heavy weight tripod, so bye bye Gitzo to be replaced by a MeFoto (bargain used) and my tripod, and head, has now gone from just shy of 3kg to 1.6kg. My filters are smaller too. In fact, everything, aside from the bag is smaller and lighter. Now before everyone says I’m comparing a Ford Focus ST to a bog standard 1.2 version, yes, I get your point, but they both get me from A to B. This is only my comparison and my decision, based on what I have owned and what I own now, for my type of photography, need. I do not expect everyone to agree, but you read this far so want to see what I did, why, and importantly if it works, for me. It may not well work for you because I don’t know you or what you need for your photography.
Anyway, that is the reasoning behind going to the PEN-F and it took a lot longer to get here than I planned, but what follows is my very first outing and my first impressions. I should say that I tried a demo PEN-F first, thanks to Ffordes Photographic Ltd of Beauly, where I have shopped since before they were even in Scotland!
Anyway, enjoy the photos.
MY FIRST OUTING
I confess that the PEN-F is, as the advertising says, a beast. So also is the full manual, the menu system, and all the options. For the first time, ever, I actually had to read all of it, before I could attempt to take a variety of images and understand what it (and I) was doing. I was still reading it at 3am this morning!
So, I traded in my Fujifilm kit based on the demo one, yesterday and I took the PEN-F for a walk this morning. I went local, to the coastal/dune/woodland path parking in Lossiemouth. To be realistic for the future explorations and longer walks, I went with all my landscape kit, plus the Nikon P900 for any chance wildlife encounters, and also took my new used MeFoto tripod. These are the shots from this morning and my comments on them:
I started out with the camera in Aperture Priority because that is what I use most, and I left it there the whole walk. Normally I would use this and Manual for almost all shoots. I also started with the infamous front mode knob set to the I setting and left the menu settings for the colours for this in default. This was the first shot of the morning –
I stumbled across this wonderful use for something long since dumped. The colours in the sky and the heather are rendered accurately and the tones were good enough on the in-camera jpeg I didn’t require the RAW image. I shot both Raw and Fine Jpegs throughout, as I wanted to experiment with the modes, filters, and effects, but I also wanted the ‘negatives’ too if you get what I mean (film pun).
I decided to get a little closer to the subject, physically, and this in-camera jpeg initially came out a little too light so I have increased the contrast, reduced the highlights very slightly, and increased the vibrance very slightly in Lightroom (to the jpeg). All alterations were under 10%. I am pleased with the result, remembering this is the kit lens that adds just £99 to the cost of buying the body only. The detail is superb, and all the tones are there. I could have improved the in-camera processing when taking the image by using the plentiful adjustments that are available, but it was very difficult to see the screen in the bright sun. People often ask why I sometimes take an umbrella when it’s sunny – it’s because it helps you see the screen, although you do look an idiot using it. (Try it, somewhere quiet…)
I took a few shots wandering around, and in both portrait and landscape orientation, and at a variety of lens lengths, all on the kit lens, before I had a look at concentrating on the heather.
I had read on several reviews and forums that you loose some of the depth of field with the Micro 4/3rd systems and so f8 becomes more like f11 or something along those lines. With that in mind, and knowing the reported sweet spot of the lens, I tended to stick around f5.6 as with this shot of the heather, and sadly it didn’t end up with the depth I thought I would. That isn’t actually a bad thing as it means I know I can stop down further now to get it. I also think this heather is a little too pink rather than purple and would adjust this from the raw file if the shot was worth keeping. I put this up unaltered to show you the straight from camera shot.
Having used the normal shot settings I decided to play with some of the Art filters that come from using the now famous knob on the front the camera. This is Pin Hole III and I liked the colours of that one for the situation, and with the colours around me, although it does move the heather to the pinker tones again.
Because the filters only work on jpeg image files, obviously, where these settings are used here, these are all out of camera jpegs without any Lightroom alteration unless specified. I had set the Mono one set-up to give me the maximum grain, and at the time of shooting, I adjusted the ‘colours’ to produce was would happen with a ‘red filter’. Although I liked the contrast in the sky, which would have required at least a polariser on this bright sunny day to achieve without that in-camera adjustment, I do find the grain a bit too much. I have now set my mono up with +1 contrast, +1 sharpness, and the lowest added grain setting instead. I look forward to seeing the difference.
I really like option to display the real time exposure, without screen correction, in the Olympus system. This was actually a huge selling point for me because although I don’t do a lot of long exposures now, because they are a bit too common and almost a cliche, I imagine it will save a lot of effort. I like the idea of being able to see what you get with the Live Time mode, and stop a Bulb exposure when you like what you see. Trying to work out exactly how long to time a long exposure, and then to physically time it, in the field, is hard work. Often it is frankly a bit “hit and miss”, and so to cover all bases you shoot several images with slightly different durations. You can’t see what you’ve really got then until you get home. Knowing what you’re getting during the process is a revolution that I can see many manufacturers following, and also something that would only be available on screen or with an EVF. You simply couldn’t do it with the viewfinder on a DSLR because you aren’t looking at what the sensor is actually doing.
I imagine it is the same set-up, within the camera’s programming, that also enables you to see the difference that filters would make at the time of shooting on the screen also. I look forward to seeing how it works, especially with ND grads and polarisers. You do have to play in the menu though, as the default setting appears to have the screen and EVF compensate to produce the image for ‘best viewing’. I turned this off, and now it is set to show me what I am actually getting, which to my mind should really be the default setting on a camera that is squarely aimed at the enthusiast/professional photographer.
At this point in the walk I moved to the 9-18mm wide angle lens for the remainder of the walk.
I like monochrome work, I specialised in it as a wedding photographer, so I will be experimenting with these settings quite a lot. I really like that you can personalise all the settings, save a number of options, and manipulate the art/colour filters for each individual shot if required. Love that Olympus, really love that a lot. It goes with my way of working and getting it right ‘in-camera’. I want to spend my time taking photos, not working on my Mac. So, I guess it was worth reading the manual…
I was warned online that there really is an awful lot to learn about the operation of the Olympus cameras because they put so much in, option wise. I don’t want them to change it, but I imagine it scares the hell out of novices who probably don’t get to see or use half of what the cameras are capable of. For someone with 30 years as a photographer, many of those as a professional, and 20 years digitally, I did not expect to have to read the manual hardly at all. I would say, that aside from looking a few things up, I didn’t read the manual for the Fujifilm cameras and certainly not for my Nikons. If I hadn’t have customised the PEN-F I feel I would have been frustrated with it, and disappointed with the operation and the results. It was worth the effort, but you have to be aware you need to make that effort. Of course, you have four saveable Custom options which could reduce work in the future, and some settings will now stay as they are.
One thing that does concern me though: I did my custom settings to the main menus, then I did the Firmware upgrades for the lens and body as directed, and in spite of telling it to save and then restore my settings, it didn’t, so I had to troll through all the menus and do it again. It may be that normal menu settings don’t save unless specified as the Custom options on the dial, but I hope not. I don’t want to sacrifice C1 (Aperture Priority with my settings) and C2 (Manual with my settings) for my normal operations.
I also don’t like the way Olympus installs its upgrades by connecting directly to the camera. On more than two occasions with firmware upgrades on the Fujifilm X series, the download corrupted at some point. As the file is then being saved onto a card, which is then installed into the camera, it didn’t compromise the camera by failing part way through. If the file was corrupt, the camera simply didn’t accept it, and the update procedure was cancelled without loss. I have a nasty fear that if the download is direct to the camera via the app, and it corrupts, I may be stuck with a camera that effectively has no functioning operating system installed! This may be unjustified, and it may be recoverable in the event, but it is scary. Anyway, back to the images…
Neither of the two lenses I purchased, the 9-18mm or the 14-45mm are macro lenses. But this is what you can with the 9-18mm, which happened t be on the camera at the time:
Again, I was expecting slightly more depth of field, based on what I had read, and so I apologise for the out of focus forward mushrooms in the shot. I will know in future I need to set a smaller aperture value for these types of images. This was shot with Color mode II on the front knob and has been cropped very slightly in Lightroom. The uncropped version is below:
Please remember all these images are resized to a maximum of 2000pixels on the longest edge and are therefore NOT displaying at full size. So, if you’re impressed, imagine what the full size ones look like! I don’t often pixel peep but I couldn’t resist with a new camera and I was impressed.
If anyone wants the full size images please let me know and I will add them as linked attachments. I don’t do this routinely as it can make the site slow to load, and it’s time consuming for me.
I was really enjoying getting up close and personal again with such a wide angle lens. Something I had enjoyed with the Tokina lens I had on my Nikon. This image is cropped to emphasise the flowers nearest the camera and the vignette (lost when cropped from the original art filter – Pinhole III again) was then added back in Lightroom.
The PEN-F is so much fun to use that I found myself doing more experimental shots than I would previously have taken. I got into the mud for this one and the thing sticking up is really only around 10″ tall. I like the gunky face which I only actually spotted on the monitor back home. This could have suited the Diorama setting more than the Pinhole and I wish I had done a shot in both modes. I was however very pleased with the reflections.
My biggest immediate impression of the PEN-F is – what a lot of fun photography is, again. As I said in the first section, if you were with me, the Fuji X series provide an excellent workhorse for capturing a vision you have already, but the PEN-F whilst being also a fully capable workhorse, inspires you to re-visialise things and try experimenting more. It is a workhorse capable professional camera, with added fun.
These are, bar far, not the greatest photos I have ever taken, but in total I was out for just over 2hours and I shot 38 images. This is pretty much what would have been a roll of film, and a traditional quick test for a new camera. I enjoyed the short trip and I would have been out longer if it hadn’t not only rained, but also lost the nice clouds decent light. I can work with and in this, but I didn’t want to. It was nearly lunchtime and the forecast wasn’t showing it improving. I feel that I still need to finish reading the manual to fully get to all the features and options of the PEN-F, so I was happy to come back in.
On location – a lot nicer to carry!
My bag with PEN-F shot with the P900
My bag with P900 shot with the PEN-F
My bag was more of a pleasure to carry, and you can see my basic set up for this trip was somewhat lost in that expanse of Lowepro loveliness. On that note, I wish Lowepro would pay more attention to their hiking pedigree and put a bit more effort into their more economical ranges. Sadly the quest for the perfect camera bag has never been fulfilled, by any photographer, as a far as I am aware.
Just to finish; if you are doubting the capabilities of a smaller sensor camera then I would ask you to question what the marketing bods have told you to get you to buy newer, pricier, and more gear. How much do you really need? I mean, look at these!
Think that’s, even mildly, impressive? Well that isn’t from the PEN-F, it isn’t even a 4/3rds sensor, or a camera anything like as featured or sophisticated as the PEN-F. Remember I said I took the Nikon P900 along with me? Well these are from that tiny weeny sensor! Imagine what I am going to do with the PEN-F…
The forecast was for sunny spells, not sunny spells and showers. Arriving at Cummingston (marked Car Park on the map above) it was properly raining, but ten minutes sat in the car watching it bouncing off the bonnet and it had stopped. Twenty minutes into the walk towards Burghead and the sun was trying to come out.
This was to be a funny walk in some ways, because instead of going out and back, we were going from the middle to one end, then back to the middle, then off to the other end. The reason for this? Well, this was where I knew the car parking, toilets, and access to the old disused railway line actually was. So, that was where we started. The accidental benefit if this is that we also knew there was a toilet there which would provide another opportunity thus mid-way, and the walk could also then be cut short if the weather deteriorated. Thankfully, it didn’t.
I had been to this spot before, for a quick recce of the route, but the weather wasn’t conducive to the shots I wanted at the time, so I planned to return and combine a bird walk, with a dog walk, with a photo walk. I would be experimenting with the Nikon P900 as a documentary camera at the same time. As much as I would like a proper long lens for my Fuji XT-2, I simply don’t want to pay £1,500 for a lens that I also don’t really want to have to carry. I think I am getting to point where I have realised that I take far more photos, and far better photos, if I am not bogged down with loads of stuff. The Nikon P900 takes you from the 35mm equivalent of 24mm to whopping 2000mm, in one camera. It also features GPS to record your shots (hence the map up above, and also enables you to capture birds and wildlife, as well as landscapes and scenes, all in one camera. Or so it promises on the advertising…
I had bought it for birding, but I wanted to see if it could do more than that and if I would still be happy with the result.
As this was also a bird walk, I had taken my binoculars with me and within moments of getting onto the main path, with a view of the shore, I had spotted the first ID confusion bird of the day.
A long way out it would have been impossible to get a clear photograph of it without the P900, and so I was happy with this somewhat uninteresting shot as a means of later identifying the eclipse male eider duck. I couldn’t see as much detail with my excellent Minox 8x binoculars as I could later see, at home, on my screen with the images from the camera. The bird would have remained unidentified without this shot, and so already I had found a reason to be pleased I took the P900.
I had started to envision using this camera for documentary photography for my Detritus project, so I wanted to see how well it would cope at the wider end. I was very happy with the camera for bird photography, but would it, with its tiny sensor, still give me the details I require for a more ambitious project? I have had images from it accepted to stock agencies, but there is little room for additional cropping, which means you have to really concentrate on getting the composition right in-camera, because you can’t really change it and still maintain a large enough file, with sufficient data, later on.
The Fuji XT-2 gives me files in the 15MP+ range to the 6MP+ range of the P900, as a rough guideline. Agencies need a minimum of 5MP, so there isn’t a lot to play with from the Nikon. This means making firm decisions at the time of shooting, like we did with film to an extent, and I actually like having to work like this. It makes you really take care and consideration when shooting if the room for error is so very small.
My Detritus project, so far shot exclusively on the Fuji XT-2, is about the impact of man’s waste on the natural environment of Scotland and the detrimental effect it has on the scenery and as a threat to the tourism industry. I will be travelling around some of the most scenic and best loved locations and showing them, warts and all, rather than polishing them up to the ideal images we know and love of Scotland. This project will require a lot of travel and a lot of walking to remote locations, and thus if I can find a way to reduce what I need to carry to a bare minimum whilst ensuring that I won’t then regret it or be limited on arrival at a location by this, there will be a lot of incentives and benefits to carrying just the Nikon.
Another part of this walk today was to capture some images of the birds found around the Moray Coast, and for that the Nikon P900 would be perfect. It enables you to get very close shots of the birds without disturbing them, and impacting on their behaviour. I am very interested in birds responses to their environment rather than just portraits, and being able to observe without impacting on that is very important for accurate documentary photography. Birds are easily disturbed and this effects their behaviour, so being able to photograph them without this is very important to the birds but also to me.
The coastline around Moray is spectacular in many places, allowing you to enjoy the geology, geography, and still often feel like you are alone, even on a busy summer weekend. The weather was still clearing and the view across the whole of the Firth to the far north coast breathtaking. But it wasn’t long before we came across some more detritus of us humans and our working of the north sea.
I was very pleased to be able to document this at the same time as being able to get the wildlife shots, whilst still carrying only one light weight camera. In practice and operating it was living up to my hopes, although I do hate that the buttons and dials move far too easily, especially compared to the Fuji, which are stiffer and lockable. This is only a problem if you don’t double check before you fire off the shutter – and sometimes, when birds and wildlife are involved you don’t have time to check and so it can be annoying.
We had set off from the car park in the direction of Burghead and just as we got to St. Aethan’s (or Aidan’s) Well, I was delighted to spot two Stonechat. This one was obliging for a couple of shots only.
It is claimed that the water from the well has healing powers, but whatever it has or hasn’t got going for it, Patches wasn’t touching it.
Having declined a drink from the bowl provided at the well, he was more than happy to have some good old tap water from the Sigg bottle along with me instead.
As we approached Burghead I was very happy to find this Linnet on the rocks. It would appear they have developed a way of opening the small limpets that cling to the rocks, or otherwise they are getting something in the rocks that makes it worth the effort.
I like to photograph bird behaviour, even if I don’t fully understand at the time what the bird might be doing. Although I much prefer to shoot stills than moving images, I do like my subjects to have motion and to be engaged in doing something.
As we came into Burghead the rocks change and the famous carbuncle homes into view…
It provides a lot of work, of course, but it isn’t half ugly to look at. Coming at it from any angle you can’t fail to spot it, but from this angle it dominated the whole of the village. Reaching the edge of the village it was time to turn around and walk back past Cummingston and head for Hopeman.
I was pleased again to see another three Linnets as these were first I had seen this year and in my first in this area.
I was delighted to be able to photograph the small gatherings of wading birds on the shore from the path, again without disturbing them, and delighted to find Redshanks, Turnstones, and even a Knot amongst the larger Oystercatchers.
Having successfully documented the detritus, and the wider scene, it felt natural to also be able to capture images of the wildlife and the birds in particular. The sun was shining through the clouds now and picking out the plumage of the birds made for some lovely images, especially with the surf breaking in the background thus confirming the location whilst enabling a relative close-up of the birds.
We went down into Hopeman and found our way through the houses to the harbour, where a small but interesting gallery has the added advantage of serving tea, coffee, ice creams, biscuits, and cans of cold pop. Hopeman also has easily accessible and very nice toilets, at the harbour, which enabled us to refuel and refresh before heading back to Cummingston again, and the picking up the car.
The path follows the old railway and so it’s easy and accessible for all abilities, although some sections are small short gravelled rather than tarmac, and getting up and down to the car parks can be a bit interesting at some points. The route is part of the Moray Coastal Trail which runs all the way to Inverness, and is a designated cycle route as well as a path for walking and recreation. There are facilities at various points along its length and it also goes past or through some campsite for those wishing to tackle its full length. More details can be found here.
The side of the path host a number of interesting plants and an abundance of insects. The bees were making light work of these flowers, which is good to see given how much trouble bees are in, nationally and globally.
As we reached Cummingston of the third and final time, I took a route off from the main path to examine the caves and sea stacks, which attract climbers as much as they do the wildlife.
Again, it wasn’t hard to find more detritus from man’s long love affair with the sea. I do not wish to think about the trouble that this rope could cause to our wildlife, and tails of entangled whales, seals, and even dolphins are sadly becoming more and more common around the globe.
The walk was extremely pleasant an undertaking, and whilst it is not long in distance there is plenty to see all the way along the route. With birdwatching, dog walking, photography, and just general exercise and interest all combined, and the tea stop of course, we were out for much of the day. I would certainly take the route again, and with Patches snoring gently in my office, I am also now delighted with the results form the Nikon and look forward to using it again for more than just birding.